Cobi panssariauto SD.KFZ 251/1 Ausf. A
61,00 €
Cobi panssariauto SD.KFZ 251/1 Ausf. A
Cobi panssariauto SD.KFZ 251/1 Ausf. A sisältää 590 erittäin yksityiskohtaista palaa, kaksi saksalaista mekaanikkohahmoa sekä panssarivaunulaatan. Mukana tulee myös värikkäät, helppolukuiset yksityiskohtaiset ohjeet. COBI SD KFZ 251 AUSF A Halfttrack -osat sopivat yhteen LEGOn kanssa. Tulet vaikuttumaan COBI-sarjojen laadusta. COBI-sarjat eroavat toisista rakennussarjoista siinä, että ne tarjoavat paljon paloja ja suurin osa osista on ainutlaatuisia COBI:lle. Cobin rakennuspalikoissa ei ole tarroja, sillä värit ja kuviot on painettu niihin kiinni. Cobi kestää hyvin kulutusta isältä pojalle.
Varasto loppu
COBI SD KFZ 251 AUSF A Halftrack
Sd.Kfz. 251 (Sonderkraftfahrzeug 251) oli Hanomag-yhtiön suunnittelema toisen maailmansodan aikaisemman panssaroimattoman Sd.Kfz:n pohjalta valmistettu saksalainen panssarivaunu. 11 ajoneuvoa. Sd.Kfz. 251 oli suunniteltu kuljettamaan Panzergrenadier saksalaisen koneistetun jalkaväen taisteluun. Sd.Kfz. 251:t olivat sodan eniten tuotetut saksalaiset puolitelat, joissa oli seitsemän valmistajan valmistamia vähintään 15 252 ajoneuvoa ja muunnelmaa. Jotkut lähteet väittävät, että Sd.Kfz. sekä saksalaiset että liittoutuneiden sotilaat kutsuivat 251:tä yleisesti yksinkertaisesti ”Hanomagiksi”. Panssarivaunun valmistajan mukaan tämä on kyseenalaistettu, ja se on saattanut olla vain sodanjälkeinen etiketti. Saksalaiset upseerit kutsuivat niitä päivittäisissä käskyissään ja muistelmissaan nimellä SPW (Schützenpanzerwagen tai panssaroitu jalkaväen ajoneuvo).
- Sisältää: 592 palaa, kaksi saksalaista mekaanikkohahmoa sekä panssarivaunulaatan.
- Koko kasattuna: 23,5 cm, korkeus 9 cm ja leveys 8,5 cm.
An armored half-tracked tansporter unambiguously associated by everyone with the German army. Sd.Kfz 251/1 Ausf.A was faithfully reproduced using construction blocks. The model has been covered with high-quality durable prints. The prints imitate the equipment and painting of a vehicle from the initial period of the Second World War. The vehicle was equipped with movable wheels with real tires. Track traction consisting of realistic block links works and behaves like real while moving the vehicle. Storage compartments, opening rear double doors, machine guns and additional accessories make the fun of the transporter more attractive. The whole set is complemented by two figures representing a mechanic and a technician. These are completely new figurines complementing the collection. Brick with the name of the vehicle included!
The Sd.Kfz.251 armored personnel carrier is the perfect set for both small and large fans of construction blocks. Perfect for both a shelf and a block diorama. Older fans of blocks will appreciate the model as a collector’s item and inspiration for building realistic dioramas or own constructions. Slightly more experienced designers will find a huge room for modification in this model. The German army had a staggering number of 23 official versions of the transporter, designed for very different tasks. You can easily disassemble the rifles and try to create a fire support version with a cannon or a technical support vehicle. Adding a tarpaulin or roofing is the way to create a sanitary version.
Sd.Kfz.251 is the basic half-track armored personnel carrier of the German army during World War II. Its production lasted from 1939 to 1945. Other combat vehicles were also built on its basis. It was produced in four production models, from A to D, and 23 basic and many field versions, the standard and the most numerous of which was the Sd.Kfz.251/1 armored personnel carrier. The design of the Sd.Kfz.251 transporter was based on a modified Sd.Kfz.11 chassis. The armored hull was made of welded armor plates and consisted of two large parts joined by bolts. The front section ended behind the driver’s seat. It protected the driver, commander and engine. The combat compartment opened in advance was to accommodate 10 soldiers. The rear, large, outward-opening door provided access to the interior.
592 high-quality components
produced in the EU by a company with over 20 years of tradition
meet the safety standards for children’s products
fully compatible with other brands of construction blocks
blocks with prints do not deform and do not fade during play or under the influence of temperature
clear and intuitive instruction based on drawings and icons
two figurines
Paino | 0,450 kg (kilogramma) |
---|---|
Mitat | 45 × 30,4 × 5,9 cm (senttimetri) |
Tutustu myös
Varastossa
Varastossa
Varastossa
Varastossa
Varastossa
Varastossa
Varastossa
Varastossa